? 2015 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccs-32/cs-32 page 1 ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches electrical characteristics form factor spdt, break before make frequency range ccs-32 cs-32 dc?12 ghz dc?12 ghz characteristic impedance 50 ohms operate time 10 ms (max.) release time 10 ms (max.) actuation voltage available 12 15 24 28 v actuation current, max. @ ambient 600 500 300 250 ma rf power handling 1.1 kw cw @ 1.1 ghz environmental and physical characteristics operating temperature commercial model, ccs-32 elite model, cs-32 ?40c to 65c ?55c to 85c vibration (mil-std-202 method 214, condition d, non-operating) 10 g?s rms shock (mil-std-202 method 213, condition d, non-operating) 500 g?s standard actuator life actuator life w/ additional features 2,000,000 cycles 1,000,000 cycles connector type type n or tnc humidity (moisture seal) available weight 6 oz. (170.1g) (max.) typical performance characteristics: n connector option (tnc connector, 11gh z max.) frequency dc?3 ghz 3?6 ghz 6?9 ghz 9?12 ghz insertion loss, db, typical. 0.2 0.2 0.4 0.4 isolation, db, typical. 70 70 70 50 vswr , typical. 1.2:1 1.2:1 1.3:1 1.3:1 part numbering system connector n : type n female t : tnc female hn : high power type n female ht : high power tnc female actuator voltage 1: 28 vdc failsafe 2: 15 vdc failsafe 3: 12 vdc failsafe 4: 24 vdc failsafe actuator type 0: standard contacts c: indicator contacts **see parts list on page 8-9 options t: ttl drivers with diodes d: transient suppression diodes m: moisture seal s: 9 pin d-sub connector actuator voltage ccs-32 n 1 c - t ** series connectors actuator type options for other options, contact factory. part number description ccs-32 commercial failsafe spdt, dc-12ghz cs-32 elite failsafe spdt, dc-12ghz the ccs-32/cs-32 is a broadband, spdt, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. the characteristic impedance is 50 ohms. the small switches incorporate type n or tnc connectors. the ccs-32/cs-32 series switch is offered with a failsafe actuator. this design is compatible with the two most common mounting hole patterns. the ccs-32/cs-32 series switch is interchangeable with a variety of switches. for maximum limits, please see charts on page 3-5 available with usb & ethernet control! click here mma series
ccs-32/cs-32 page 2 specifications are subject to change without notice ? 2015 teledyne coax switches ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches schematics and mechanical outline 9 pin d-sub pinout for failsafe spdt options pin no. basic indicators ttl indicators & ttl 1+ + 2- - 3 common common 411 5 6vswvsw 7a a 8b b 9c c 1 6 ?- s option ? 9 - pin d - sub connector ( example : ccs -32 n 10- s ) truth table (with ttl option) logic input rf path indicator (if applicable) 1in to 1 in to 2 ab 0 on off c 0 1off on 0 c indicators n type outline analog tnc outline h = 1.70 max. std model h = 2.30 max. ttl model h = 1.70 max. std model h = 2.30 max. ttl model ttl 2x solder terminals solder wire maximum temp 250oc for no more than 5 sec
? 2015 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccs-32/cs-32 page 3 ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches typical narrowband rf insertion loss performance curves typical maximum test limit -1 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 00.511.522.53 insertion loss ( db ) frequency ( ghz ) insertion loss ( dc-3 ghz ) -1 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 3 3.5 4 4.5 5 5.5 6 insertion loss ( db ) frequency ( ghz ) insertion loss ( 3-6 ghz ) -1 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 6 6.5 7 7.5 8 8.5 9 insertion loss ( db ) frequency ( ghz ) insertion loss ( 6-9 ghz ) -1 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 9 9.5 10 10.5 11 11.5 12 insertion loss ( db ) frequency ( ghz ) insertion loss ( 9-12 ghz )
ccs-32/cs-32 page 4 specifications are subject to change without notice ? 2015 teledyne coax switches ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches typical narrowband rf isolation performance curves typical maximum test limit -140 -120 -100 -80 -60 -40 -20 0 00.511.522.53 isolation (db) frequency ( ghz ) isolation ( dc-3 ghz ) -140 -120 -100 -80 -60 -40 -20 0 33.544.555.56 isolation (db) frequency ( ghz ) isolation ( 3-6 ghz ) -140 -120 -100 -80 -60 -40 -20 0 66.577.588.59 isolation (db) frequency ( ghz ) isolation ( 6-9 ghz ) -140 -120 -100 -80 -60 -40 -20 0 9 9.5 10 10.5 11 11.5 12 isolation (db) frequency ( ghz ) isolation ( 9-12 ghz )
? 2015 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccs-32/cs-32 page 5 ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches typical narrowband rf vswr performance curves typical maximum test limit 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 0 0.5 1 1.5 2 2.5 3 vswr frequency ( ghz ) vswr ( dc-3 ghz ) 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 3 3.5 4 4.5 5 5.5 6 vswr frequency ( ghz ) vswr ( 3-6 ghz ) 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 66.577.588.59 vswr frequency ( ghz ) vswr ( 6-9 ghz ) 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 9 9.5 10 10.5 11 11.5 12 vswr frequency ( ghz ) vswr ( 9-12 ghz )
ccs-32/cs-32 page 6 specifications are subject to change without notice ? 2015 teledyne coax switches ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches power handling vs. frequency estimates based on the following reference conditions: ? ambient temperature of 40c or less ? sea level operation ? load vswr of 1.20:1 maximum ? no high-power (hot) switching please contact teledyne coax switches for derating factors when applications do not meet the foregoing reference conditions. typical power performance curve 3000 power (w) frequency ghz 2000 1000 800 600 400 300 200 100 80 60 40 30 20 10 .1 .2 .3 .4 .6 .8 1 2 4 6 8 10 special high power switches standard n & tnc switches
? 2015 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccs-32/cs-32 page 7 ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches actuator an actuator is the electromechanical mechanism that transfers the rf contacts from one position to another upon dc command. arc suppression diode a diode is connected in parallel with the coil. this diode limits the ?reverse emf spike? generated when the coil de- energizes to 0.7 volts. the diode cathode is connected to the positive side of the coil and the anode is connected to the negative side. date code all switches are marked with either a unique serial number or a date code. date codes are in accordance with mil- std-1285 paragraph 5.2.5 and consist of four digits. the rst two digits de ne the year and the last two digits de ne the week of the year (yyww). thus, 1032 identi es switches that passed through nal inspection during the 32nd week of 2010. failsafe a failsafe switch reverts to the default or failsafe position when actuating voltage is removed. this is realized by a retur n spr ing within the dr ive mechanism. this t ype of switch requires the continuous application of operating voltage to select and hold any position. (multi-position switches are normally open with no voltage applied). indicator indicators tell the system which position the switch is in. other names for indicators are telemetry contacts or tellback circuit. indicators are usually a set of internally mounted dc contacts linked to the actuator. they can be wired to digital input lines, status lights, or interlocks. unless otherwise speci ed, the maximum indicator contact rating is 30 vdc, 50 ma, or 1.5 watts into a resistive load. isolation isolation is the measure of the power level at the output connector of an unconnected rf channel as referenced to the power at the input connector. it is speci ed in db below the input power level. spdt switch a single-pole double-throw, bi-directional switch that can be used as having one input and two outputs or two inputs and one output. switching time switching time is the total interval beginning with the arrival of the leading edge of the command pulse at the switch dc input and ending with the completion of the switch transfer, including contact bounce. it consists of three parts: (1) inductive delay in the coil, (2) transfer time of the physical movement of the contacts, and (3) the bounce time of the rf contacts. ttl switch driver option as a special option, switch drivers can be provided for both failsafe and latching switches, which are compatible with industry-standard low-power schottky ttl circuits. performance parameters vs frequency generally speaking, the rf performance of coaxial switches is frequency dependent. with increasing frequency, vswr and insertion loss increase while isolation decreases. all data sheets specify these three parameters as ?worst case? at the highest operating frequency. if the switch is to be used over a narrow frequency band, better performance can be achieved. actuator current vs temperature the resistance of the actuator coil varies as a function of temperature. there is an inverse relationship between the operating temperature of the switch and the actuator drive current. for switches operating at 28 vdc, the approximate actuator drive current at temperature, t, can be calculated using the equation: magnetic sensitivity an electro-mechanical switch can be sensitive to ferrous materials and external magnetic elds. neighboring ferrous materials should be permitted no closer than 0.5 inches and adjacent external magnetic elds should be limited to a ux density of less than 5 gauss. glossary i a [1 + .00385 (t-20)] where: i t = actuator current at temperature, t i a = room temperature actuator current C see data sheet t = temperature of interest in c i t = carrier frequency 1 carrier frequency 2 pim 3rd order frequency pim 5th order fre- quency 870 mhz 893 mhz 847 mhz 824 mhz 3rd order intermodulation 5th order intermodulation spdt ?91 dbm ?110 dbm ?134 dbc ?153 dbc special feature switching high-power or highly sensitive signals ensure the most linear response with the best galvanically matched contact system in the industry. extremely low passive intermodulation is standard on all of our switches.
ccs-32/cs-32 page 8 specifications are subject to change without notice ? 2015 teledyne coax switches ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches failsafe ccs-32n/cs-32n/ ? ccs-32t/cs-32t part number list * x = 1 (28vdc), 2 (15vdc), 3 (12vdc) and 4 (24vdc) p art n o .p art n o .p art n o .p art n o . 1 ccs-32nxc 43 cs-32nx0-ms 85 cs-32tx0 127 cs-32hnxc-ms 2 ccs-32nxc-d 44 cs-32nx0-s 86 cs-32tx0-d 128 cs-32hnxc-s 3 ccs-32nxc-dm 45 cs-32nx0-t 87 cs-32tx0-dm 129 cs-32hnxc-t 4 ccs-32nxc-dms 46 cs-32nx0-tm 88 cs-32tx0-dms 130 cs-32hnxc-tm 5 ccs-32nxc-ds 47 cs-32nx0-tms 89 cs-32tx0-ds 131 cs-32hnxc-tms 6 ccs-32nxc-m 48 cs-32nx0-ts 90 cs-32tx0-m 132 cs-32hnxc-ts 7 ccs-32nxc-ms 49 ccs-32txc 91 cs-32tx0-ms 133 cs-32hnx0 8 ccs-32nxc-s 50 ccs-32txc-d 92 cs-32tx0-s 134 cs-32hnx0-d 9 ccs-32nxc-t 51 ccs-32txc-dm 93 cs-32tx0-t 135 cs-32hnx0-dm 10 ccs-32nxc-tm 52 ccs-32txc-dms 94 cs-32tx0-tm 136 cs-32hnx0-dms 11 ccs-32nxc-tms 53 ccs-32txc-ds 95 cs-32tx0-tms 137 cs-32hnx0-ds 12 ccs-32nxc-ts 54 ccs-32txc-m 96 cs-32tx0-ts 138 cs-32hnx0-m 13 ccs-32nx0 55 ccs-32txc-ms 97 ccs-32hnxc 139 cs-32hnx0-ms 14 ccs-32nx0-d 56 ccs-32txc-s 98 ccs-32hnxc-d 140 cs-32hnx0-s 15 ccs-32nx0-dm 57 ccs-32txc-t 99 ccs-32hnxc-dm 141 cs-32hnx0-t 16 ccs-32nx0-dms 58 ccs-32txc-tm 100 ccs-32hnxc-dms 142 cs-32hnx0-tm 17 ccs-32nx0-ds 59 ccs-32txc-tms 101 ccs-32hnxc-ds 143 cs-32hnx0-tms 18 ccs-32nx0-m 60 ccs-32txc-ts 102 ccs-32hnxc-m 144 cs-32hnx0-ts 19 ccs-32nx0-ms 61 ccs-32tx0 103 ccs-32hnxc-ms 145 ccs-32htxc 20 ccs-32nx0-s 62 ccs-32tx0-d 104 ccs-32hnxc-s 146 ccs-32htxc-d 21 ccs-32nx0-t 63 ccs-32tx0-dm 105 ccs-32hnxc-t 147 ccs-32htxc-dm 22 ccs-32nx0-tm 64 ccs-32tx0-dms 106 ccs-32hnxc-tm 148 ccs-32htxc-dms 23 ccs-32nx0-tms 65 ccs-32tx0-ds 107 ccs-32hnxc-tms 149 ccs-32htxc-ds 24 ccs-32nx0-ts 66 ccs-32tx0-m 108 ccs-32hnxc-ts 150 ccs-32htxc-m 25 cs-32nxc 67 ccs-32tx0-ms 109 ccs-32hnx0 151 ccs-32htxc-ms 26 cs-32nxc-d 68 ccs-32tx0-s 110 ccs-32hnx0-d 152 ccs-32htxc-s 27 cs-32nxc-dm 69 ccs-32tx0-t 111 ccs-32hnx0-dm 153 ccs-32htxc-t 28 cs-32nxc-dms 70 ccs-32tx0-tm 112 ccs-32hnx0-dms 154 ccs-32htxc-tm 29 cs-32nxc-ds 71 ccs-32tx0-tms 113 ccs-32hnx0-ds 155 ccs-32htxc-tms 30 cs-32nxc-m 72 ccs-32tx0-ts 114 ccs-32hnx0-m 156 ccs-32htxc-ts 31 cs-32nxc-ms 73 cs-32txc 115 ccs-32hnx0-ms 157 ccs-32htx0 32 cs-32nxc-s 74 cs-32txc-d 116 ccs-32hnx0-s 158 ccs-32htx0-d 33 cs-32nxc-t 75 cs-32txc-dm 117 ccs-32hnx0-t 159 ccs-32htx0-dm 34 cs-32nxc-tm 76 cs-32txc-dms 118 ccs-32hnx0-tm 160 ccs-32htx0-dms 35 cs-32nxc-tms 77 cs-32txc-ds 119 ccs-32hnx0-tms 161 ccs-32htx0-ds 36 cs-32nxc-ts 78 cs-32txc-m 120 ccs-32hnx0-ts 162 ccs-32htx0-m 37 cs-32nx0 79 cs-32txc-ms 121 cs-32hnxc 163 ccs-32htx0-ms 38 cs-32nx0-d 80 cs-32txc-s 122 cs-32hnxc-d 164 ccs-32htx0-s 39 cs-32nx0-dm 81 cs-32txc-t 123 cs-32hnxc-dm 165 ccs-32htx0-t 40 cs-32nx0-dms 82 cs-32txc-tm 124 cs-32hnxc-dms 166 ccs-32htx0-tm 41 cs-32nx0-ds 83 cs-32txc-tms 125 cs-32hnxc-ds 167 ccs-32htx0-tms 42 cs-32nx0-m 84 cs-32txc-ts 126 cs-32hnxc-m 168 ccs-32htx0-ts
? 2015 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccs-32/cs-32 page 9 ccs-32\cs-32\112015\q4 series ccs-32/cs-32 high power dc?12 ghz failsafe spdt coaxial switch coax switches * x = 6 (28vdc), 7 (15vdc), 8 (12vdc) and 9 (24vdc) p art n o . 169 cs-32htxc 170 cs-32htxc-d 171 cs-32htxc-dm 172 cs-32htxc-dms 173 cs-32htxc-ds 174 cs-32htxc-m 175 cs-32htxc-ms 176 cs-32htxc-s 177 cs-32htxc-t 178 cs-32htxc-tm 179 cs-32htxc-tms 180 cs-32htxc-ts 181 cs-32htx0 182 cs-32htx0-d 183 cs-32htx0-dm 184 cs-32htx0-dms 185 cs-32htx0-ds 186 cs-32htx0-m 187 cs-32htx0-ms 188 cs-32htx0-s 189 cs-32htx0-t 190 cs-32htx0-tm 191 cs-32htx0-tms 192 cs-32htx0-ts failsafe ccs-32n/cs-32n/ ? ccs-32t/cs-32t part number list
|
